Interoperable Devices

Wall Plates are ideal for areas where a discreet, rugged zone sensor is required. All Wall Plates feature ¼” closed cell foam backing which covers the plate and insulates it from wall temperature.

The BAPI CO2 Sensor in the BAPI-Stat 4 Enclosure is an accurate and reliable way of incorporating demand controlled ventilation into a building’s HVAC strategy. It measures the CO2 in ranges of 0 to 2,000, 0 to 5,000, 0 to 10,000 and 0 to 50,000 ppm with a field selectable output of 0 to 5 or 0 to 10 VDC.

The BAPI-Stat 4 Style room unit is available as a humidity only sensor or as a combination temperature and humidity sensor with optional display, temperature setpoint adjustment and occupant override.

Leviton’s photocells are sensors used to precisely monitor either task or ambient light levels.

Leviton’s OSSMT Multi-Technology (Dual Technology) Decora Wall Switch Occupancy Sensor is used to provide automatic light-ing control for energy savings and convenience in a variety of commercial applications.

Digital Lighting Systems 0-10v to ELV 1000W @ 277VAC

Digital Lighting Systems 0-10v to ELV 500W @ 120VAC

ECOSPEC® LINEAR DIMMING CONTROL MODULE PLENUM RATED (LDCM-PL) takes a 0-10V dimming signal and a fixed line voltage input and converts it to a reverse dimmed out for up to 1000W with a 277V load and 450W on a 120V load. One LDCM can be used per run up to the maximum wattage

The BAPI CO2 Sensor in the BAPI-Stat 4 Enclosure is an accurate and reliable way of incorporating demand controlled ventilation into a building’s HVAC strategy. It measures the CO2 in ranges of 0 to 2,000, 0 to 5,000, 0 to 10,000 and 0 to 50,000 ppm with a field selectable output of 0 to 5 or 0 to 10 VDC.

The compact, semi-ruggedized IBR200 LTE router is designed for secure, cloud-managed IoT networking. The IBR200 enables use of low-cost M2M/IoT data plans from cellular carrier/operators, and with NetCloud Perimeter, addresses the biggest gap in IoT: security.

Gigabit, Mode A/B Inline PoE Splitter for 12 Volt Devices like IP Cameras, Media Players, and Speakers

Wattstopper’s CI-355 passive infrared (PIR) occupancy sensor automatically turns lighting on and off based on occupancy. The sensor mounts on the ceiling with a flat, low-profile appearance and provides 360 degrees of coverage.